Command Communications ComSwitch 8500-t Manuel d'utilisateur

Customer Service: 1-800-288-6794(for U.S. and Canada)Customer Service E-mail:[email protected]

One Line/Multiple Telephone ExtensionsPlug one end of the provided 2-wire modular line cord into the LINE-IN port on the CS8500-t. Plug theother end o

Caller IDTo connect a Caller ID device to the CS8500-t, simply plug the Caller ID into the PHONE port, and thenplug your phone into the Caller ID.The

Connecting CS8500-t to line 2 of a 2-line phone (Using three-way adapters)NOTE: If connecting to line 1 of a 2-line phone, reverse L1 and L2 phone cor

The diagram shows telephone devices connected to the CS8500-t for a telephone system. Follow the sameprocedures if you have a mini-telephone system in

Special Operating NotesBefore operating the CS8500-t, be sure that you understand the following information concerning thetelephone equipment that is

Hearing User Instructions1. Plug a single line tone telephone into the PHONE port of the CS8500-t2. Pick up the telephone handset and you will hear

Answering Incoming CallsWhen the CS8500-t answers a call and does not detect any signal, the call will be routed to the ANS.MACHINE or PHONE port.NOTE

Turn Answering Machine to FAX Transfer ON1. Plug a single line touch-tone telephone into PHONE port of the CS8500-t2. Pick up the telephone handset

Receiving a TTY/TDD callThere are 3 modes of TTY/TDD calls:0 = No voice announcement/no TTY announcement1 = 45 bps w/ voice announcement2 = 50 bps w/

Turn Distinctive Ring Detection ON1. Plug a single line touch-tone telephone into the PHONE port of the CS8500-t2. Pick up the telephone handset (th

Two-Burst Ring to TTY/TDD port1. Plug a single line touch-tone telephone into the PHONE port of the CS8500-t2. Pick up the telephone handset (the PH

TroubleshootingWhy are fax calls being transferred to my telephone and/or answering machine?See "Answering incoming calls" for transferring

Two year Limited Warranty/Service InformationWARRANTOR: Command Communications, Inc.ELEMENTS OF WARRANTY: Command Communications, Inc. warrants, for t

Registration informationThe CS 8500-t has been registered with the Federal Communications Commission (FCC). It meets FCC requirements and may be conne

www.commandcommunications.net7025 South Fulton Street, #120Englewood, CO 80112(303) 792-0890 Fax (303) 792-0855email: [email protected] S

Table of ContentsQuick Install...…………………………... 1Before You Begin...

Quick Install1. Plug one end of the provided 2-wire modular line cord into the LINE-IN port on the CS8500-t.2. Plug the other end of the modular line

This guide is designed to introduce you to the various installation and operational procedures for using theComSwitch® 8500-t. Please read through thi

Introduction to the CS8500-tThank you for purchasing the CS8500-t. This product was designed for environments that have hearing-impaired and non heari

The CS8500-t has over 30 programmable features that allow the user to customize its operation. Inaddition, the CS8500-t is compatible with:1. Call Wa

The CS8500-t can be placed on either a flat surface, ormounted on a wall with the connected telephone line cordsabove or below the unit. To mount on a

One Line/Single Telephone InstallationThe following diagram shows a complete installation for a single line telephone connection. While theconnections